|
|
Parani-BCD110 Rev.B Bluetooth embedded OEM module DIP type, Class 1, SMA connector, SPP firmware
Part #:
BCD110B-DS-SPP
$28.00
Out of Stock
|
The Parani-BCD110 is a Bluetooth Class 1 OEM module for OEM manufacturers who want to implement Bluetooth Class 1 functionality with their products cost effectively and also in timely manner.
The BCD110 supports Class 1 Bluetooth transmission level for longer communication distance typically ranges from 200 m up to 1 km. The BCD110 supports UART, USB, PCM, PIO interfaces for the communication with the OEM products.
The BCD110 supports Bluetooth v2.0+EDR, SPP (Serial Port Profile), Sena I/O profile, SCO connections, and digital I/O with up to 7 simultaneous multiple connections.
It is designed to work out-of-box for real world SPP applications such as POS (Point-of-sales), industrial automation, remote metering and other various applications. Optionally, the BCD110 can be supplied with only software stack up to HCI level so entire Bluetooth stack runs on the host side for the application such as USB dongles for computers, or OEM manufacturers can even develop and embed their own firmware into the BCD110.
The BCD110 is fully qualified with Bluetooth v.2.0+EDR specification, therefore OEM manufacturers can save cost and time for overall OEM product certifications, which makes the BCD110 an ideal solution for larger volume and cost sensitive applications.
- Bluetooth Class 1
- Bluetooth v2.0+EDR specification
- Transmit Power: +18dBm Typical
- Receive sensitivity: -90dBm (0.1% BER)
- Integrated 8Mbit Flash Memory
- Supports Serial Port Profile (SPP), Sena I/O Profile, SCO Connection
- Working distance (In an open field): Nom.200m, up to 1000m
- Supports built-in chip, stub and dipole antennas
- Standard HCI over UART or USB
- BCD110 firmware supporting up to 7 simultaneous multiple connections
- Firmware upgrade via windows-based software (ParaniUpdater)
- Easy to use Windows configuration tool available.
- ROHS compliant
|
Bluetooth Specifications | Bluetooth v2.0 + EDR | Class1 | Profile: SPP(Serial Port Profile), Sena I/O Profile | Working distance: By default antenna is 200m (0.12 mile), Supports up to 1000m (0.62 mile) | Transmit Power | +18dBm Typical | Receive Sensitivity | -90dBm (0.1% BER) | TX Output Spectrum-Frequency range | 2402 MHz - 2480 MHz | Interfaces | UART, USB, I2C, PCM, PIO | Serial Interface | - Serial UART speed up to 921.6kbps
- CTS/RTS flow control, DTR/DSR for loop-back & full transfer
| I/O Interface | 5 DIO, 2 AI | PIN Interface | - BCD110Sx: 1.27mm SMD Pad 18 x 2 (36pin)
- BCD110Dx: 1.27mm Pin Header 18 x 2 (36pin)
| USB Interface | V2.0 | Configuration | ParaniWIN, Modem AT command set | Firmware Update | ParaniUpdater | Power | - Nominal : 70mA@3.3Vdc
- Maximum : 150mA@3.3Vdc (200mA@3.3Vdc in Test Mode)
| Environmental | - Operating temperature: -40°C ~ 80°C
- Storage temperature: -40°C ~ 85°C
- Humidity: 90% (Non-condensing)
| Physical properties | Parani-BCD110 Dimension- DIP type
34.6 x 16.8 x 7.5 mm (0.661 in x 1.362 in x 0.295 in) - SMD type
34.6 x 14.8 x 3.0 mm (1.362 in x 0.583 in x 0.118 in)
| Weight- Parani-BCD110B-SC-MPF: 2g
- Parani-BCD110B-SU-MPF: 2g
- Parani-BCD110B-DC-MPF: 3g
- Parani-BCD110B-DU-MPF: 3g
- Parani-BCD110B-DS-MPF: 4g
| Approvals | FCC, CE, IC, KC, TELEC, SIG | Warranty | 1-year limited warranty |
|
|
|
|
|